HomeAbout usService
Inquiry Blog Contact us


FAQS
Delivery time
 Usually, our delivery time is 5 to 8 days after order confirmed


Payment methods
 Payment by wire transfers(T/T) ,Western Union and L/C would be appreciated


Customizing a lamp
Our products can be made subject to CE, UL, TUV,PSE,SAA standard to meet the electrical requirements of many countries.


Warranty
 All of products,we provide 3 years warranty,at least use 30,000 Hours


LED Tubes Radar Sensor 12 Watt

 LED Tubes Radar Sensor 12 Watt

Product Information

 1.Specification:

Power consumption

12 Watt

Input voltage

AC 90-265V,130Ma

Freqency 

50~60Hz

Quantity of LED

SMD3014-96PCS

Size

As follow

Socket

G13 Radar

Luminous Flux

1000lm¡À10%

Main Material

Alu

Working Temperature

-40~+55

Storage Temperature

-45~+65

Brightness Decay

1%-2% at 1000 hours

CRI

75Ra

Power Factor

>0.9

Fire Rating

UL94V-2

Dielectric Strength test

1000V AC leakage current 10 mA,3 seconds

Life-span

>30,000 hours

Warranty

3 years


2.Product Features:
Products are used in the basement, garage, underground parking, lighting, corridor, warehouse, airport building, supermarket, shopping malls, Banks, etc. Every day need to long time lighting places.

Microwave radar sensor lamp, lamp can be automatically sensing people or cars come on together, according to set the time after one car go back to the dim light or completely turn off is free to set the brightness of the 1% to 100%. Because is a bit dim lighting, underground garage than 100% lighting lamp energy saving more than 90%! Save money and safe!

Radar is by emitting electromagnetic wave and echo of target detection and determination of target information.

Now this way of lighting should have controls in three ways:

1. The voice control, the price is low, faults by the outside noise interference,

Work status:

Voice to induction value (> 50 db), LED fluorescent tube keep lihgting; After 20 seconds,dim state power 2 w or 3 w.

Sound sensor values (< 50 db), dim state power 2 w or 3 w.

2., infrared sensor, the price is low, the disadvantage is that the infrared sensors due to the height, the metal pipe and radiation Angle limits of detection blind area.

Work status:

Activities in the area of the sensor, LED tubes has maintained lighting

People in induction area after 20 seconds when stationary,dim state power 2 w or 3 w;

When people leave the induction area about 20 seconds later, the light back into the dim state automatically, 2 w or 3 w power

3. the radar sensor, Angle detection blind area can overcome the shortcomings, the price is slightly higher

Activities in the area of the sensor, LED tubes has maintained lighting

People in induction area after 20 seconds when stationary,dim state power 2 w or 3 w

When people leave the induction area about 20 seconds later, the light back into the dim state automatically, only 3 w power,as follow

3. Luminous flux test

4. Light intensity


5. Illuminance diagram


6.Package

 

Packing size(mm)

Box/Carton

Total

N.W/G.W£¨Kg£©

Giftbox Demension

1220*29*29mm

1PCS/Box

1PCS

0.52/PCS

Carton Demension

1265*300*270

72PCS/Carton

72PCS

38.7/Carton

7.Application Range

Home, hotel, hotel, property development, hospitals and other public corridor area.

8.Install

1)Single-ended power

2)
 double-ended power

9.Matters needing attention

1.before power up, please confirm the working voltage is correct, and then use the right voltage for power supply products, misconnection voltage products may cause permanent damage. Charging contacts do not use any part of the body after the LED lights cup at the bottom of the live part, otherwise you will have get an electric shock risk.

2.preliminary budget, the quantity of product required, and then according to the budget amount and the rated power of a single product, calculate the total power, and design the distribution plan;

3.in broke open the packing before use, please verify if there is any damage in transit. If there is damaged, please immediately notify the supplier and stop using the damaged products.

Temperature around 4, if the product appear larger fluctuation, don't immediately connected to power supply, the heat generated in the steam may damage the product, be sure to wait until the lamps and lanterns can reach room temperature before using the power supply is connected;

5.before the installation, ensure the installation position can be 10 times the weight of the product. Installed on no vibration, no swing, no fire hazard level ground;

6.this product at work, the light body shell temperature can reach up to 40 ¡æ, should let the lamps and lanterns from equipment sensitive to temperature. Lamps and lanterns for semiconductor lighting products, particularly sensitive to ambient temperature, working environment temperature is higher than 45 ¡æ to be greatly shorten its service life. Reason should keep away from heat source, the lamps and lanterns of lamps and lanterns work environment ventilated breathe freely, to ensure the appropriate environmental temperature. If working environment temperature of lamps and lanterns during usage at 0 ¡æ to 25 ¡æ, its life can be longer;

7, product in use process, in a short period of time often power outages, otherwise easy to burn.

Eight, to ensure that the products are in good condition, and the use of safe, please follow this instruction on the instructions and reminders.